Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Then solder your main power cable to the board (approx 6? long using 12AWG cable) with your
chosen connector on one end (this will connect to your flight batteries).
Next you will need a cable to connect to your electrics tray in order to power all of your components
(approx 4? long using 16AWG cable), again fitting your chosen connector on one end.
Once completed decide where you want to locate your distribution board in the HexH2o (we
recommend on the top just in front of the grommets).
Ensure you leave enough room for the electronics tray to be fitted.
17 / 25
