Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
under the heat shrink to give extra protection to the joint.
Then carefully pull the cables back through from the inside of the HexH2o.
11. Sealing the HexH2o body
Generously apply marine grade sealant to the motor cables, grommets holes, breather tubes, GPS
cable and the four stand off bolts from the inside ensuring you make a good watertight seal.
12. ESC’s and distribution board
Inside the HexH2o are 6 ESC mounting brackets. These are specifically designed to mount the
E800 ESCs. Before they can be installed you will need to connect them to the E800 distribution
board.
Solder each of the ESCs to the distribution board.
16 / 25
