Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Then using some Marine grade sealant run a bead around the inside of the top half of the GPS
holder and inside the neck (where the cable comes out. Gently push fit the top half of the GPS unit
in place, effectively sealing the Naza GPS inside the holder.
Run the GPS cable through the pre-drilled slotted hole in the top of the HexH2o frame, then using
the supplied cover plate and bolts fit in place using Marine grade sealant so seal it in position.
Ensure the area is water tight.
8. Fitting motors, motor cables
Fit each motor to the provided carbon motor mount plate (don’t forget blue thread lock) using
the motor bolts provided with the DJI E600 tool kits.
12 / 25
