Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
14. Video Transmitter
If you are using a video transmitter for a downlink, you will need to connect this to the power on
your electrics tray, or power distribution board and connect the video link to your Gopro, gimbal or
OSD (depending on your setup).
Mount the VTX (away from the other components) to the HexH2o frame using velcro. We
recommend you fit the VTX with the provided heat sink to aid cooling.
We then recommend you use a 30cm SMA cable which connects to the antenna on the outside of
the HexH2o, to the VTX inside the HexH2o. Drill a 8mm hole in the side of the HexH2o body where
you want to mount the antenna and fit the supplied grommet. Pass the threaded end of the SMA
extension lead through the grommet. Once fitted ensure you seal the area from the inside using
marine grade sealant.
20 / 25
