Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Carefully fit the 6 larger motor cable grommets into the pre-drilled holes in the top of the hull, then
fit the 2 remaining smaller grommets into the pre-cut breather tube holes.
Fit the provided breather tubes through the breather tube grommets (leave approximately 4?
sticking out). The tubes are fixed in plan on the inside of the HexH2o using two of the supplied
cable tie clips, and supplied cable ties as per the picture below.
Use some 5min epoxy to fix the cable tie clips to the inside of the HexH2o body.
8 / 25
