Qtum HD1049, Инструкция по установке и эксплуатации

Страница: 21 / 89

21
HD1049 installation and user manual
①
Multiscreen Display : Changing the display mode
②
Tilt Up / Zoom In
③
Tilt Down / Zoom Out
④
Pan Left / Focus Near
⑤
Pan Right / Focus Far
⑥
PTZ Camera Selection
⑦
Set Preset
⑧
Call Preset
⑨
PTZ Mode : The PTZ mode is toggled between P/T and Z/F mode whenever this
button is pressed.
[ Camera selection ]
The PTZ cameras can be controlled in either full screen or split screen mode.
If in split screen mode press the PTZ Camera Selection button(
⑥
), the PTZ camera icon
will step from one camera to the next on the split screen.
[ Pan and Tilt control ]
Press the PTZ Mode button(
⑨
) to enter the Pan/Tilt mode.
To move the dome use the arrows buttons;
Left(
④
) : Pan left, Right(
⑤
) : Pan right, Up(
②
) : Tilt up, Down(
③
) : Tilt down
[ Zoom and Focus control ]
Press the PTZ Mode button(
⑨
) to enter the Zoom/Focus mode.
To zoom or focus use the arrows buttons;
Left(
④
) : Focus near, Right(
⑤
) : Focus far, Up(
②
) : Zoom in, Down(
③
) : Zoom out
[ Preset positions ]
1. To store a preset position, move the camera to the required position.
2. Press the Set Preset button(
⑦
), the popup window will appear.
3. Enter the preset number to be stored then press SEL.
[ Call Preset ]
1. To recall a preset position press the Call Preset button(
⑧
), the popup window will appear.
2. Enter the preset number you want then press SEL.