Qtum HD1049, Инструкция по установке и эксплуатации

Страница: 13 / 89

13
HD1049 installation and user manual
Connecting audio
To record audio on the DVR, connect to the audio source.
● Audio input : Connect to the audio out of the microphone.
To listen to live or recorded audio, connect to an amplified speaker system.
● Audio output : Connect to the audio in of the audio AMP.
Connecting to a network
Use the network port to connect to remote PC via ethernet network.
Connecting to a sensor input
There are 4 individual alarm inputs marked as Sensor In.
● Sensor inputs : Connect to (+) terminal of a sensor.
● Common GND : Connect to (–) terminals of sensors.
Connecting to a alarm output
The DVR can activate external devices such as buzzers or lights using the relay.
There are 4 relay outputs marked as Alarm out.
● Alarm outputs (A1~A4) : Connect to (+) terminal of buzzer or light.
● Alarm outputs (B1~B4) : Connect to (–) terminals of buzzer or light.
Connecting to a PTZ camera
This RS485 connector can be used to control Pan / Tilt / Zoom camera.
Common
GND
Sensor
Inputs
(+) (-)
Alarm
Outputs