QTS AN-X4-ABRIO-SCAN Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 80

background image

Page

80

AN-X4-ABRIO-SCAN

Nov 2023

Warranty

Quest Technical Solutions warrants its products to be free from defects in workmanship or material
under normal use and service for three years after date of shipment. Quest Technical Solutions will
repair or replace without charge any equipment found to be defective during the warranty period.
Final determination of the nature and responsibility for defective or damaged equipment will be made
by Quest Technical Solutions personnel.

All warranties hereunder are contingent upon proper use in the application for which the product was
intended and do not cover products which have been modified or repaired without Quest Technical
Solutions approval or which have been subjected to accident, improper maintenance, installation or
application, or on which original identification marks have been removed or altered. This Limited
Warranty also will not apply to interconnecting cables or wires, consumables nor to any damage
resulting from battery leakage.

In all cases Quest Technical Solutions’ responsibility and liability under this warranty shall be limited
to the cost of the equipment. The purchaser must obtain shipping instructions for the prepaid return of
any item under this Warranty provision and compliance with such instruction shall be a condition of
this warranty.

Except for the express warranty stated above Quest Technical Solutions disclaims all warranties with
regard to the products sold hereunder including all implied warranties of merchantability and fitness
and the express warranties stated herein are in lieu of all obligations or liabilities on the part of Quest
Technical Solutions for damages including, but not limited to, consequential damages arising out
of/or in connection with the use or performance of the Product.

«
...
78
79
80

Содержание AN-X4-ABRIO-SCAN

















































































Отзывы:

Нет отзывов

Похожие инструкции для AN-X4-ABRIO-SCAN

Бренд: M-LOCKS Страницы: 3

Бренд: HALDER Страницы: 7

Бренд: CAME BPT Страницы: 16

Бренд: TEXTILE ID Страницы: 4

Бренд: Daewoo Страницы: 21

Бренд: Datavideo Страницы: 40

Бренд: Mandik Страницы: 34

Studio 500 Series

Бренд: JAMO Страницы: 16

Бренд: M-system Страницы: 6

ATT COMBI LIFT 4.40 S

Бренд: Nussbaum Страницы: 260

Бренд: Roadstar Страницы: 23

Бренд: Siku Страницы: 150

Бренд: urmet domus Страницы: 28

Бренд: Commax Страницы: 15

2N HELIOS IP VARIO

Бренд: VanillaIP Страницы: 4

Zonemaster ZoneTouch V2

Бренд: Polyaire Страницы: 24

Бренд: Reliable Страницы: 4

750-872/020-000

Бренд: WAGO Страницы: 290

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды