Hardware Installation
7. Replacing Modules
120
www.qtech.ru
Figure 7-9 Removing the Fan for QSW-7605
7.6
Removing PoE Frame
Do not touch any bare wire, terminal or the power instruction on the switch.
The PoE frame does not support hot swapping. Do not remove the frame unless the switch
is not electrified. Besides, do not put your hands inside the frame.
Preparation
1.
Wear an anti-static wrist strap close to your skin and have it properly grounded.
2.
Take out the PoE power frame from the package.
Take the following steps to remove the PoE frame:
1.
Unloosen the captive screws on the frame with the Phillips screwdriver.
2.
Pull out the frame and put it in the anti-static bag.
3.
Insert the frame into the slot along the slide rail until it hits the back panel.
4.
Tighten the captive screws on the frame with the Phillips screwdriver.
Figure 7-10 Removing the PoE power frame for QSW-7608
