manualshive.com logo in svg

QSC touchmix-30 pro, Руководство пользователя, Страница: 32 / 146

Поделиться
Скачать
QSC touchmix-30 pro Скачать руководство пользователя страница 32

23

1001108-01-F

8.  Follow the directions and adjust the 

-13.5 dB

Noise

Level

 so that the RTA displays a moderate level of activity. 

9.  Touch 

Measure

 . The mixer produces the test signal and captures the measurement data. 

NOTE:

 

Each output of a TouchMix mixer actually has two graphic equalizers. One is used by the Tuning Wizard to apply corrections 

based on the measurement data. Settings for this equalizer are indicated by the outlined or “ghost” fader caps on the GEQ screen. The 
other equalizer may be adjusted by the user.

10.  Select a target tuning.

 

» Select 

Flat

 – The wizard flattens the system response using the Tuning EQ and sets the user EQ to flat. You 

can adjust to taste from there.

 

» Select 

Live

 – The wizard flattens the system response and applies a User EQ setting that works well for live 

sound reinforcement systems.

 

» Select 

Keep Existing

 – The wizard flattens the system response using the Tuning EQ but leaves the user EQ settings 

untouched. 

11.  Touch 

Restart

 if the measurement is interrupted by, for example, unexpected, loud ambient noise. Perform the 

measurement again. 

12.  Touch 

Finish

 to continue.

13.  Touch 

Navigate To GEQ

 to view the GEQ settings.

Содержание touchmix-30 pro



















































































































































Отзывы:

Нет отзывов