manualshive.com logo in svg

QSC touchmix-30 pro, Руководство пользователя, Страница: 125 / 146

Поделиться
Скачать
QSC touchmix-30 pro Скачать руководство пользователя страница 125

116

 1001108-01-F

TouchMix-30 Pro Phones and Monitor           

Phones and Monitor Level Control and Monitor settings.

NOTE:

 

By default, no audio signal is 

sent to the Phones / Monitor Outputs. To send audio channel signals 
(including Main L/R) to the Phones / Monitor Outputs. Enable the Cue 
button for the channels you want to listen to.

Phones Level

1. 

Phones / Cue Level

 

 –

 Controls the level of the signal on the Phones 

outputs.

Monitor Level and Settings

1. 

Source

 (Monitor) – Select the source you want to send to the Monitor output.

2. 

In

 – Engages / bypasses the delay.

3. 

Delay

 – The delay is used to align the audio coming from a distant stage with 

the near-field monitor signal heard at the mixer position. Digital readouts are in 
feet, milliseconds, and meters.

4.  Adjust the output level for the Monitor.

TouchMix-8 and TouchMix-16 Phones 
and TouchMix-16 Monitor   

Controls the output level for the Phones Cue and Monitor Cue

  

Phones

Monitor

NOTE:

 

The Monitor Level control is available only on the TouchMix-16.

Phones (1) and Monitor (2) Level

 – Controls the level of the Cue signal on the 

Phones and Monitor outputs.

NOTE:

 

By default, no audio signal is sent to the Phones / Monitor Outputs. To 

send audio channel signals (including Main LR) to the Phones / Monitor Outputs. 
Enable the Cue button for the channels you want to listen to.

Press Phones OR Press Monitor

Phones

-40

-20

-10

-5

U

5

10

Phones

Close

1

Press Phones OR Press Monitor

-40

-20

-10

-5

U

5

10

Aux 1

Aux 5

Aux 9

Aux 13

Aux 2

Aux 6

Aux 10

Aux 14

Aux 3

Aux 7

Aux 11

Main LR

Aux 4

Aux 8

Aux 12

Cue

Monitor

Source

Delay

In

0.00 feet

0.00 ms

0.00 m

Close

4

1

2

3

Monitor

Press Phones OR Press Monitor

1

2

Содержание touchmix-30 pro



















































































































































Отзывы:

Нет отзывов