manualshive.com logo in svg

QSC touchmix-30 pro, Руководство пользователя, Страница: 24 / 146

Поделиться
Скачать
QSC touchmix-30 pro Скачать руководство пользователя страница 24

15

1001108-01-F

Transferring tracks between TouchMix and DAW

A utility application – TouchMix DAW Utility - that facilitates transferring tracks between TouchMix mixers and Digital Audio Workstations is available 
for download at www.qsc.com. The application runs on Mac or Windows computers.

Sample Rate

In general, use 44.1 kHz for CD projects, and 48 kHz for video projects. Do not change sample rate while recording.

To View or Change Sample Rate:  

Menu

Mixer Setup

Sample Rate 44.1 kHz

48 kHz

Multi-Track Recording

All TouchMix models are capable of recording all audio inputs plus a stereo mix directly to a USB hard-drive (see above). The audio is captures as a 
32-bit, floating point wave file. 

Recording and Playback Capacity 

•  TouchMix-30 Pro: 32 tracks (30 stereo mix) 

•  TouchMix-16: 22 tracks (20 stereo mix) 

•  TouchMix-8: 14 tracks (12 stereo mix) 

Connect a hard-drive (see above) to one of the USB inputs of the mixer.

Set the External Recording & Playback Mode to Multitrack:   

Rec/

Play

Recording

Mode

Stereo MP3

USB Drive Playback

Multitrack

USB Drive

Multitrack

DAW

To create a recording session:  

Rec/

Play

Recording

Setup

New Session

Enter a 

name

Create

To select channels to record:  

Rec/

Play

Inputs 1-8

And/Or

Inputs 9-16

And/Or

Inputs 17-24

And/Or

Stereo In/2-Trk

Touch 

Arm

 for each channel you want to record.

Once all the channels you wish to record have been armed, touch (Record Button) to begin recording. Touch the (Stop) button to end recording.

NOTE: 

User buttons may be assigned to Arm / Disarm and select Track or Input as the source for all channels at once. 

"User 

Buttons" on page 24

IMPORTANT:

 

Do not unplug your TouchMix until you have stopped recording! If you do, your recorded tracks will not be usable. You 

must end the Session by touching the STOP button on the transport control. Doing so writes a header file that is needed in order to 
play back the recording or import it into a DAW.

The TouchMix mixers permit over-dubs, however only the last recorded track will play back on the mixer. Earlier passes are left on the drive and 
may be imported into a DAW.

Содержание touchmix-30 pro



















































































































































Отзывы:

Нет отзывов