Qsan XCubeSAN XS5224D Скачать руководство пользователя страница 78

Страница: 78 / 339

56 ©



Missing

: The disk drive is missing in the pool.



Rebuilding

: The disk drive is being rebuilt.



Transitioning

: The disk drive is being migrated or is replaced by

another disk when rebuilding occurs.



Scrubbing

: The disk drive is being scrubbed.



Check Done

: The disk drive has been checked the disk health.

Health

The health of the disk drive:



Good

: The disk drive is good.



Failed

: The disk drive is failed.



Error Alert

: S.M.A.R.T. error alerts.



Read Errors

: The disk drive has unrecoverable read errors.

Capacity

The capacity of the disk drive.

Disk Type

The type of the disk drive:



[ SAS HDD | NL-SAS HDD | SAS SSD | SATA SSD ]



[ 12.0Gb/s | 6.0Gb/s | 3.0Gb/s | 1.5Gb/s ]

Manufacturer

The manufacturer of the disk drive.

Model

The model name of disk drive.

Click the

Close

button to exit the window.

Performance

The performance block displays sum of throughput of all front-end ports for reference.

Figure 5-7

Performance Block in the Dashboard

Содержание XCubeSAN XS5224D



















































































































































































































































































































































Результаты поиска

Содержание XCubeSAN XS5224D

Отзывы:

Qsan XCubeSAN XS5224D, Руководство пользователя, Страница: 78 / 339

Результаты поиска

Содержание XCubeSAN XS5224D

Отзывы: