154 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
4.
Enter the
Allowed Hosts
with semicolons (;) or click the
Add Host
button to add one by
one. Fill-in
wildcard (*) for access by all hosts.
5.
Select a
Target
from the drop-down list.
6.
Select a
LUN
from the drop-down list.
7.
Select a
Permission
level, normally set it as
Read-write
.
8.
Click the
OK
button to map a LUN.
The matching rules of access control are followed from created time of the LUNs. The
earlier created LUN is prior to the matching rules. For example: there are two LUN rules
which are set to the same volume:
1.
Allow Hosts sets
*
, LUN is
LUN 0
2.
Allow Hosts sets
iqn.host1
, LUN
is LUN 1
The host
iqn.host2
can login successfully because it matches the rule 1.
Wildcard * and ? are allowed in this field.
Wildcard * can replace any word.
Wildcard ?: can replace only one character.
For example:
iqn.host? -> iqn.host1 and iqn.host2 are accepted.
iqn.host* -> iqn.host1 and iqn.host12345 are accepted.
This field cannot accept comma, so iqn.host1, iqn.host2 stands a long string, not two iqns.
8.6.2.
Map a LUN of Fibre Channel Connectivity
Here’s an example of mapping a LUN of fibre channel connectivity.
1.
Select the
LUN Mappings
function submenu, click the
Map LUN
button.
Содержание XCubeSAN XS5224D
