Qsan XCubeSAN XS5224D, Руководство пользователя

Страница: 287 / 339

Data Backup
265
12.3.3. Configure Remote Replication
Create a Remote Replication Task
Here’s an example of creating a remote replication task from source volume to target one.
Assume that we define the name and the IP addresses in the example.
Figure 12-29 Example of Creating a Remote Replication Task
Site A Source Unit Configuration:

Controller 1, Onboard LAN 1 IP Address: 10.10.1.1
 Controller 1, Onboard LAN 2 IP Address: 10.10.1.2

Controller 2, Onboard LAN 1 IP Address: 10.10.1.3
 Controller 2, Onboard LAN 2 IP Address: 10.10.1.4

Source Volume Name: Source-Vol-1
Site B Target Unit Configuration:

Controller 1, Onboard LAN 1 IP Address: 10.10.1.101
 Controller 1, Onboard LAN 2 IP Address: 10.10.1.102

Controller 2, Onboard LAN 1 IP Address: 10.10.1.103
 Controller 2, Onboard LAN 2 IP Address: 10.10.1.104

Target Volume: Name: Target-Vol-2
Operate SANOS web UI of Site B target unit:
1. Before replication, it must have a backup target volume. Select the Volumes function
submenu, click the Create Volume button. And then select Volume Type to Backup
Volume . Please refer to the chapter 8.5.1, Create a Volume section in the Storage
Management chapter.