QRS QRS-101 Скачать руководство пользователя

Страница: 20 / 40

TIMER 1: [OFF] . . .

TIME T1: 22:30

NOTE
If a QRS

-101 control unit with activated timer is taken out of the power supply and reconnected

later, the device will switch on, independently, display the text „AUTOMODE“ and switch off
again.

Activation and deactivation of both timers start on a switched-off device. To program the timer 1 please press

the

-key keeping it pressed. Now turn the device on via

On/Off

-key. The display will then show

To activate the timer apply the

-key, to deactivate the timer apply the

-key. The display will

change, accordingly. This command must be confi rmed via the

A/B

-key.

If the timer is deactivated, the device will now start with the standard operating mode. If the timer is activated

you may now start with its programming.

As its fi rst programming step you will set the time at which the therapy shall be started, automatically. The

display will show the following menu (exemplary time):

The blinking cursor is positioned on the time’s fi rst digit „2“, as shown above. You may now change the time

by increasing the digit positioned below the cursor by pressing the

-key, or to lessen it via the

-key.

The

A/B

-key confi rms the current value and goes to the next position.

After confi rming the last time digit you automatically reach the menu to set the therapy parameters. Alterna-

tely you can now see the settings programmed for this timer regarding therapy program, therapy intensity,

therapy duration and applicator. To change one or several of these settings you may press the corresponding

control key in any given order.

Should 2 applicators be connected to the control unit you may also change the respective applicator via

A/B

-key. After the fi rst click on this key the programmed applicator will be displayed for 1.5 seconds.

The respective applicator will be changed by pressing the

A/B

-key a second time while the display is still

visible – i.e. no later than 1.5 seconds after the fi rst click.

Programming the timer is concluded by pressing the

Start

Stop

On/Off

-key. In both cases all previously

set values will be saved for this timer. By pressing the Start-/Stop-key the device will be set to the standard

operating mode. The on/off-key will turn the device off.

Содержание QRS-101









































Результаты поиска

Содержание QRS-101

Отзывы:

Похожие инструкции для QRS-101

Бренды по названию

Популярные бренды

QRS QRS-101, Руководство по эксплуатации

Результаты поиска

Содержание QRS-101

Отзывы:

Похожие инструкции для QRS-101

Бренды по названию

Популярные бренды