SideKar / SideKar Plus User Manual rev 3.2 Page 68 of 84
Battery Replacement
The CR2032 button battery is used to maintain the time and
date when power is removed from the SideKar. It typically lasts
for 5 years.
To replace it:
IMPORTANT
: DO NOT REMOVE THE BATTERY OUT OF
THE HOLDER BY LIFTING OR PRYING THE BATTERY
UP. THIS CAN PULL THE BATTERY HOLDER UP FROM
THE PRINTED CIRCUIT BOARD. ALWAYS SUPPORT
THE BATTERY HOLDER BY HOLDING IT DOWN AND
PRYING THE BATTERY UP BY USING A SMALL
SCREWDRIVER
BETWEEN
THE BATTERY AND THE
BATTERY HOLDER.
Turn off the SideKar
Remove the 6 cover screws
Carefully pry out the battery, being careful not to put any
upward force on the battery holder.
Replace the battery…positive side up
Replace the cover and 6 screws.
