qpcom QP-WO259GHP, Руководство пользователя

Страница: 14 / 48

-14-
2.2 Software Installation
There are no software drivers, patches or utilities installation needed, but only the
configuration setting.
Notice: It will take about 55 seconds to complete the boot up sequence after
powered on the WLAN Access Point; Power LED will be active, and after that the
WLAN Activity LED will be flashing to show the WLAN interface is enabled and
working now.
2.3 Resetting the AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose
to Reset the Access Point to the factory default settings.
To hard-reset the Access Point to Factory Default Settings,please do the following:
Notes: Access Point status:Power on
· Locate the Reset button on the back of the Access Point PCB
· Press the Reset button
·
Hold for about 5 seconds and then release
·
After the Access Point reboots (this may take a few minutes) it will be reset to the
factory default settings.
3 Software configuration
There are web based management and configuration functions allowing you to have
the jobs done easily.
The WLAN Access Point is delivered with the following factory default parameters
on the Ethernet LAN interfaces.