QNAP QMiroPlus-201W Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 70

QNAP QMiroPlus-201W Скачать руководство пользователя страница 70

EU RoHS Statement

This equipment complies with the European Union RoHS Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and electronic equipment. The directive applies to the use of
lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated
diphenyl ethers (PBDE) in electrical and electronic equipment.

ISED Compliance Statement

Industry Canada has been renamed Innovation, Science, and Economic Development Canada (ISED)
following the issue of RSP-100 Issue 11 and DC-01 Issue 06. Equipment certifications previously issued by
Industry Canada remain valid and do not require updating. Meaning you may see the names used
interchangeably in documentation. The following statement is applicable to ASiR-pRRH which has
Innovation, Science and Economic Development (ISED) approval: This device complies with ICES-003 of
Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:

1.

This device may not cause interference.

2.

This device must accept any interference, including interference that may cause undesired operation of
the device.

Radiation Exposure Statement

This product complies with the IC radiation exposure limits set for an uncontrolled environment. To comply
with RSS 102 RF exposure compliance requirements, a separation distance of at least 27 cm must be
maintained between the antenna of this device and all persons. The device for the band 5150-5350 MHz is
only for indoor usage to reduce potential harmful interference to co-channel mobile satellite systems.

CCC Class B Notice

The following statement is applicable to products shipped to China and marked with “Class B” on the
product's compliance label.

声明

这为

B

级产品。在生活环境下，它可能带来无线电干扰。如果此类情况发生，用户必须采取必

要措施。

此产品只用于室内。

消费者若使用电源适配器供电，则应购买配套使用满足相应全标准要求的电源适配器或

者是获得

CCC

认证的电源适配器

QMiroPlus-201W User Guide

Notices

69

«
...
68
69
70

Содержание QMiroPlus-201W







































































Отзывы:

Нет отзывов