QNAP HS-210 Скачать руководство пользователя страница 94

Страница: 94 / 369

devices. Enter the IP address of the TFTP server and the boot file (including

directory on the TFTP server and file name.) For remote booting of devices, enter

the public IP address of the TFTP server.

(ii) DNS Server

A DNS (Domain Name Service) server translates between a domain name (such as

google.com) and an IP address (74.125.31.105.) Configure the NAS to obtain a DNS

server address automatically or to specify the IP address of a DNS server.

Primary DNS Server: Enter the IP address of the primary DNS server.

Secondary DNS Server: Enter the IP address of the secondary DNS server.

Note :

Contact your ISP or network administrator for the IP address of the primary and

the secondary DNS servers. When the NAS plays the role as a terminal and needs

to perform independent connection (BT download, etc) enter at least one DNS

server IP for proper URL connection. Otherwise, the function may not work

properly.

If you obtain the IP address by DHCP, there is no need to configure the primary

and secondary DNS servers. In this case, enter "0.0.0.0".

(iii) Default Gateway

Select the gateway settings to use if both LAN ports have been connected to the

network (dual LAN NAS models only.)

(iv) Port Trunking

The NAS supports port trunking which combines two Ethernet interfaces into one to

increase bandwidth and offers load balancing and fault tolerance (also known as

failover.) Load balancing is a feature which distributes workloads evenly across two

Ethernet interfaces for higher redundancy. Failover is the capability to maintain high

availability by switching to a standby network interface ("slave" interface) when the

primary network interface ("master" interface) does not correspond correctly.

To use port trunking on the NAS, make sure at least two LAN ports of the NAS have

been connected to the same switch and the settings described in sections (i) and (ii)

have been configured.

Follow these steps to configure port trunking on the NAS:

1. Click "Port Trunking".

Содержание HS-210


















































































































































































































































































































































































Результаты поиска

Содержание HS-210

Отзывы:

Похожие инструкции для HS-210

Бренды по названию

Популярные бренды

QNAP HS-210, Руководство пользователя программного обеспечения

Результаты поиска

Содержание HS-210

Отзывы:

Похожие инструкции для HS-210

Бренды по названию

Популярные бренды