QNAP HS-210, Руководство пользователя программного обеспечения

Страница: 245 / 369

245
automatically execute the backup job according to the settings every time it is
connected to the NAS via any USB/eSATA interface.
c. Select to back up the data from a local disk volume to the external storage or
vice versa.
d. Click "Next".
5. Select the source and destination folders for backup. Then click "Add". Up to 128
folder pairs can be created. Click "Next".
Note :
Multiple partitions on the external storage device will be recognized as individual
disk volumes.
If a folder or its parent folder or child folder has been selected as the source or
destination in a folder pair of a backup job, the same folder cannot be selected
as the source or destination of another folder pair of the same backup job.
External Drive supports up to 16 jobs and each job supports up to 8 folder pairs.
6. Choose between real-time and scheduled backup. Real-time backup copies files that
are new, changed, and renamed from the source folder to the target folder as soon
as the changes are made after the first-time backup. Scheduled backup copies files
from the source folder to the target folder according to the schedule. The options
are:
o
Replicate Now: Copy the data immediately.
o
Periodically: Enter the time interval in hours and minutes that the backup job
should be executed. The minimum time interval is 5 minutes.
o
Hourly: Specify the minute when an hourly backup should be executed (for
example, enter "01" to execute backup on the first minute of every hour).
o
Daily: Specify the time when a daily backup should be executed (for example:
02:02 every day).
o
Weekly: Select a day of the week and the time when a weekly backup should be
executed.
o
Monthly: Select a day of the month and the time when a monthly backup should
be executed.
o
Auto-Backup: Execute data backup automatically every time the device is
connected and detected by the NAS.
7. Choose to automatically eject the external drive after the job is finished.
8. To configure the backup policy and filter settings, select "Configure policy and filter"
and click "Next". Select whether or not to enable the following options: