Tip
If the computer is connected to the NAS through the management port, Qfinder Pro will also
display the the details of the second controller.
Controller Number
IP Address
1
169.254.100.100
2
169.254.100.101
5.
Configure the network settings.
a.
On your Windows device, go to
Control Panel
>
Network and Internet
>
Network and Sharing
Center
.
b.
Identify and click the network interface connected to the management port.
The
Connection Status
window opens.
c.
Click
Properties
.
The
Connection Properties
window opens.
d.
From the list of connections, select
Internet Protocol Version 4 (TCP/IPv4)
.
e.
Click
Properties
.
The
Internet Protocol Version 4 (TCP/IPv4) Properties
window opens.
f.
Select
Use the following IP address
.
g.
Specify an IP address and subnet mask.
Example:
• IP address:
169.254.1.10
• Subnet mask:
255.255.0.0
h.
Click
OK
.
Tip
You can change the settings back to their original configuration after installing QES.
6.
In Qfinder Pro, double-click an uninitialized controller.
The setup wizard opens.
7.
Click
Quick Setup
.
The
Quick Setup
window opens.
8.
Specify a NAS name and password.
Field
Requirements
NAS name
• Length: 1-14 characters
• Valid characters: A-Z, a-z, 0-9
• Valid special characters: Hypen (-)
• Not allowed: The last character is a hyphen (-)
Password
• Length: 5-64 characters
• Valid characters: All ASCII characters
ES2486dc User Guide
Installation and Configuration
44
