QMS DeskLaser 1600, Руководство пользователя

Страница: 98 / 112

QMS DeskLaser 1600 User Manual 5-15
Message Causes and solutions
MOTOR FAILURE n
Cause: Malfunction in the feed motor, etc.
Solution: If the error recurs, consult your
dealer for service.
NO PROCESS UNIT
Cause: No print unit is installed.
Solution: Install the print unit.
OVERRUN ERROR
Cause: Incomplete in extracting
compressed data
Solution: Press the
CONT.
button.
PAPER JAM
n
Cause: Paper jam in the specified position
Solution: Clear the jammed paper from the
following area:
0: Pick roller, 1: Entry to paper path
2: Paper path, 3: Ejection from paper path
4: Duplex unit
PS ERROR mn
Cause: A PostScript error
Solution: If the error recurs, consult your
dealer for service.
Source PAPER OUT
Cause: Paper out in the specified paper
source
Solution: Supply paper.
STACKER FULL
Cause: Paper stacker full
Solution: Remove paper from the paper
stacker.
SYSTEM ERROR n
Cause: A system error on the controller
board
Solution: If the error recurs, consult your
dealer for service.
TRAY n MISS SET
Cause: Paper tray installed incorrectly
Solution: Install the paper tray.
TONER EMPTY
Cause: Toner runs out.
Solution: Replace toner cartridge and
heat roller cleaner.