QMS DeskLaser 1600, Руководство пользователя

Страница: 22 / 112

QMS DeskLaser 1600 User Manual 1-21
Your printer should be set up and connected to your computer. This
section explains how to test your installation setup by printing a trial
document from an application program under Windows. To test the
printer alone, without your computer, you can use the status report
printing which does not require the use of a computer.
Turn on your printer and observe the initialization sequence. If no RAM
(extra memory) cards have been installed, the sequence lasts about one
minute, during which the following events occur:
• The printer conducts a number of self-checks.
• The main motor rotates to check mechanical functions and clean the
drum.
• The message display indicates
READY
, indicating the printer is ready
for printing.
To print a trial document, follow these steps:
1. Start Windows and a Windows application.
2. Open your trial document.
Select an existing or start a new document. Choose a small document
for the first trial.
3. Select the printer as the document printer.
In most programs, you make the selection in a print menu. Consult
your program documentation for the exact procedure.
4. If desired, change the font(s) in the document to one of the fonts
offered by your application.
5. Check the printer.
Look in the main window of the Print Manager to make sure the
printer is activated.
Printing Your
First Document