QMS DeskLaser 1600, Руководство пользователя

Страница: 32 / 112

QMS DeskLaser 1600 User Manual 2-8
Selecting Paper Tray, MFF, or Manual Paper Feed
(
TRAY SELECT
)
Pressing
TRAY SELECT
puts the printer in tray select mode which allows
you to select paper sources to be used. The paper sources are tray 1, tray 2
(if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches for another one. When the
manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates
READY
with the
ONLINE and DATA indicators off.
2. Press the
TRAY SELECT
button briefly.
The message changes to
TRAY TRAY1*
. The asterisk means that
tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 or the MFF is installed. Pressing the
ENTER
button in this condition makes the asterisk disappear. Tray 1
is deselected. Pressing the
ENTER
button again makes the asterisk
reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the
+
or
-
buttons briefly to display another paper source.
Use the
ENTER
button in the same way as described above.
5. Save the selections.
Press
READY
button to save the new settings and return to the
ready state.
READY
MANUALFEED OFF*
TRAY TRAY1*
MANUALFEED ON TRAY TRAY2
TRAY MFF
TRAY SELECT
+
or
-