QMS DeskLaser 1600, Руководство пользователя

Страница: 46 / 112

QMS DeskLaser 1600 User Manual 2-22
Labels
This printer prints well on labels if you carefully follow these guidelines:
• Be careful to use labels under normal operating conditions. Labels are
sensitive to temperature and humidity.
• Use the rear stacker (or that of the duplex unit when your printer has
the duplex unit) so that labels are ejected straight out the back to
minimize curl.
• Use only labels without backing sheets exposed in the printable area.
Labels mounted separately on a backing sheet tend to slip, resulting in
crocked print.
• Test-print labels before using them. If jamming problems occur and
continue, try a different type of label.
Acceptable
Backing sheet
is not
exposed.
Not acceptable
Backing
sheet is
exposed.
Left guide
Rear guide
Right guide
Changing the Paper Tray Size
The paper tray can be adjusted to one of the three paper sizes: A4,
A5, LTR (Letter), and EXE (Executive). To change the size, follow
these steps:
1. Remove the paper tray
from the printer.
Refer to the illustration for
the parts you adjust when
changing the size of the
tray.
Paper size
indicator
Label