QMS DeskLaser 1600, Руководство пользователя

Страница: 30 / 112

QMS DeskLaser 1600 User Manual 2-6
Clearing the Buffer and Reinitializing the Printer (
RESET
)
Pressing and holding down
RESET
for five or more seconds clears the
print buffer and tells the printer to initialize itself. You might use this
function if you cancel a print job in the middle and want to clear the
printer and start over. In this case, permanently downloaded fonts are
removed by the initialization process. You must download the fonts again.
Printing a Status Report
(
SELF TEST
)
The status report function prints a page that summarizes printer option
settings and shows samples of resident fonts.
To print a status report, follow these steps:
1. Make sure that the message display indicates
READY
with the
ONLINE and DATA indicators off.
2. Press the
SELF TEST
button for five or more seconds.
The message changes to
PAGE CONFIG, START
. After pressing the
ENTER
button, the printer prints a status report. After printing, the
printer returns to the original state.
Notice:
The status report is for either the PCL emulation or the PS
emulation depending on the emulation you used for printing the last
document; however, the status report is for the PS emulation if it is
printed immediately after the printer is turned on. To clearly select
the report, use the test menu in setup mode.
☞