QMS 2425, Руководство по эксплуатации

Страница: 158 / 186

RPH
3DJH
406785%23ULQW6\VWHP2SHUDWLRQ
Tumble
Duplex Identifies whether duplex print jobs are to print so
they can be bound at the top edge (flip-chart
style).
Configuration Menu: Operator Control/Duplex/
Tumble Duplex
Default
Chaining Identifies whether tray chaining is enabled or
disabled. Tray chaining allows the printer to draw
media from another input source with either the
same or any size and type of media (dependent on
the choice selected) automatically when the first
input source empties.
Configuration Menu: Operator Control/Chain
Inputbins
Default Paper
Tray Tells you which input source is the default.
Configuration Menu: Operator Control/Inputbin
Default
Output Tray Tells you which output tray is the default
Configuration Menu: Operator Control/Outputbin
Number of
Paper Trays Tells you the number of input sources available on
your printer.
Configuration Menu: No equivalent.
Page Stack
Order Tells you the page stack order of the printed
document: Normal or Reverse.
Configuration Menu: Operator Control/Face up
Order
Left Margin Identifies the amount (in .01" increments) the
image is adjusted horizontally on the page.
Configuration Menu: Administration/Engine/
Image Alignment/Horiz Offset
Top Margin Identifies the amount (in .01" increments) the
image is adjusted vertically on the page.
Configuration Menu: Administration/Engine/
Image Alignment/Vertical Offset