54
4
FRESH FUNCTION (SOME UNITS) :
When the FRESH function is initiated, the ion generator is energized and will help to purify the air inside.
SLEEP FUNCTION:
The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature
settings to stay comfortable). This function can only be activated via remote control.
NOTE: The SLEEP function is not available in FAN or DRY mode.
FOLLOW ME FUNCTION:
The FOLLOW ME function enables the remote control to measure the temperature at its current location
and send this signal to the air conditioner every 3 minutes interval. When using AUTO, COOL or HEAT
modes, measuring ambient temperature from the remote control(instead of from the indoor unit itself)
will enable the air conditioner to optimize the temperature around you and ensure maximum comfort.
NOTE: Press and hold Turbo button for seven seconds to start/stop memory feature of Follow Me function.
• If the memory feature is activated, “On” displays for 3 seconds on the screen.
• If the memory feature is stopped, “OF” displays for 3 seconds on the screen.
• While the memory feature is activated, press the ON/OFF button, shift the mode or power failure will
not cancel the Follow me function.
AP FUNCTION (SOME UNITS) :
Choose AP mode to do wireless network configuration. For some units, it doesn’t work by pressing the SET
button. To enter the AP mode, continuously press the LED button seven times in 10 seconds.
J
MANUAL OPERATION (WITHOUT REMOTE)
How to operate your unit without the remote control.
In the event that your remote control fails to work, your unit can be operated manually with the MANUAL
CONTROL button located on the indoor unit. Note that manual operation is not a long-term solution, and
that operating the unit with your remote control is strongly recommended.
G
BEFORE MANUAL OPERATION
Unit must be turned off before manual operation.
TO OPERATE YOUR UNIT MANUALLY:
1. Lift the front panel of the indoor unit, and raise it until it clicks in place.
2. Locate the MANUAL CONTROL button on the right-hand side of the display box.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL button again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6. Close the front panel.
CAUTION
The manual button is intended for testing purposes and emergency operation only. Please do not
use this function unless the remote control is lost and it is absolutely necessary. To restore regular
operation, use the remote control to activate the unit.
Manual control
button
auto/
cool
man_S70xx ('21) V1.indd 54
man_S70xx ('21) V1.indd 54
08-11-2021 18:08
08-11-2021 18:08
Содержание S 7035
Страница 33: ...33 6 man_S70xx 21 V1 indd 33 man_S70xx 21 V1 indd 33 08 11 2021 18 08 08 11 2021 18 08...
Страница 65: ...65 4 man_S70xx 21 V1 indd 65 man_S70xx 21 V1 indd 65 08 11 2021 18 08 08 11 2021 18 08...
Страница 97: ...97 u man_S70xx 21 V1 indd 97 man_S70xx 21 V1 indd 97 08 11 2021 18 08 08 11 2021 18 08...
Страница 129: ...129 man_S70xx 21 V1 indd 129 man_S70xx 21 V1 indd 129 08 11 2021 18 08 08 11 2021 18 08...