Qlima S 7035, Руководство по эксплуатации

Страница: 53 / 130

53
4
Silence function
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function(some units). Due to low frequency operation of compressor, it may result in
insufficient cooling and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean
button while operating will cancel silence function.
FP function
The unit will operate at high fan speed (while compressor on) with temperature
automatically set to 8°C/46°F.
NOTE: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F to activate FP function.Press On/Off, Sleep, Mode, Fan and Temp. button while
operating will cancel this function.
LOCK function
Press together turbo button and Humidity button at the same time more
than 5 seconds to activate Lock function. All buttons will not response
except pressing these two buttons for two seconds again to disable locking.
TURBO function
Press turbo button. When you select turbo feature in COOL mode,
the unit will blow cool air with strongest wind setting to jump-start the cooling process.
When you select turbo feature in HEAT mode, for units with Electric heat elements,
the Electric HEATER will activate and jump-start the heating process.
SET function
• Press the SET button to enter the function setting, then press SET button or TEMP
▲
or
▼
button to
select the desired function. The selected symbol will flash on the display area, press the OK button to
confirm.
• To cancel the selected function, just perform the same procedures as above.
• Press the SET button to scroll through operation functions as follows: Self clean > Fresh (some units) >
Sleep > Follow me > AP mode (some units).
SELF CLEAN FUNCTION(SOME UNITS) :
Airborne bacteria can grow in the moisture that condenses around heat exchanger in the unit. With regu-
lar use, most of this moisture is evaporated from the unit. Under Self clean operation, the unit
unit will clean itself automatically. After cleaning, the unit will turn off automatically.
NOTE: You can only activate this function in COOL or DRY mode.
man_S70xx ('21) V1.indd 53 man_S70xx ('21) V1.indd 53 08-11-2021 18:08 08-11-2021 18:08