Qilive 600103564, Руководство пользователя

Страница: 10 / 28

10
Note:
• Do not overload the dryer.
• Not suitable for dripping wet textiles. The tumble dryer may be damaged or even cause a fire.
• Only dry laundry that is suitable for tumble drying. Check the labels for washing:
Suitable for tumble drying
Normal drying process: Tumble drying in the tumbler is possible under normal load and temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.
5.3 Control panel
8
KG
Bed linen
Q.6836
O
n
/Off
1 2 3 4 5

Programmes
Different drying cycles can be selected according to the users need and the type of laundry to be dried.

Display
This display shows the setting, estimated program time remaining and status messages of your dryer.

Option
These buttons are used for setting additional functions.

Start/Pause
Press the button to start or pause the drying cycle.

On/Off
Product is switched on or off.
5.4 Options
Delay
This function is used for delaying clothes drying time within 24 hours. When the delayed programme starts, the time starts to
countdown on the display, and the delay icon blinks.
1. Load your laundry and make sure the tumble dryer door is closed.
2. Press the
On/Off
button, then turn the programme selector knob and select the desired programme.
3. You can select the Anti-Crease function according to your need.
4. Press the
Delay
button.
5. Continue to press Delay to select the desired delay time.
6. After the Start/Pause button is pressed, the dryer is in the run condition. The drying procedure will be automatically performed
when the delay time is over.
7. If you press the
Start/Pause
button again, the delay function will be paused.
8. If you want to cancel the
Delay
function, press the
On/Off
button.
Time
When the
Warm
or
Cool
or
Refresh
programme is selected, the
Time
button can be used to adjust the drying time
in 10 minutes steps.
Intensity
You can adjust the dryness level of the laundry by pressing the Intensity button.
1. The intensity function can be activated only before the programme start.
2. Except for the Cotton Iron , Warm , Cool , Refresh , Wool , Delicate all the other programmes can be
the Intensity function.
Anti-Crease
At the end of the drying cycle, the anti-crease time is 60 minutes (default) or 120 minutes (selected). The Anti-Crease light will
illuminate when the anti-crease function is selected. This function prevents the laundry from creases. The laundry can be removed
during the anti-crease phase. Except for Cool , Refresh , Wool all the other programmes provide this function.
My Cycle
Used to define and save your favourite programme, which is used frequently.
1. Select the desired programme and other drying functions.
2. Press and hold the Intensity button for 3 seconds until the beep sounds and the desired programme has been saved.
3. Turn the programme selector to the
My Cycle
position, then you can start your favourite programme. If you want to change
the My Cycle settings, repeat the steps 1 and 2.