QERIDOO Kidgoo1 2018, Руководство пользователя

Страница: 17 / 38

Kidgoo 2018 Subject to change. – 09|2020 – 17
Inserting the pennant
Danger!
The pennant must always be mounted in Trailer mode. Otherwise the very low Kidgoo is
too easily overseen by other road users.
For safety reasons, we recommend putting the pennant into the pennant pouch so
that it is easily visible before every journey, including in Buggy or Walker mode.
f
Using the connecting piece, insert the pennant staff
into the extension rod.
f
Insert the extended pennant rod into the slit on the top
left of the cover and secure the position by fixing the
pennant pole in the base frame.
f
Unroll the pennant so that it can fly clearly visible on
the pennant staff.
Optional assembly steps
Installing the buggy wheel
You need the buggy wheel for Buggy and Walker mode. The buggy wheel is connected directly with
the wheel suspension attached to the frame and is mounted so that it can rotate through 360°.
f
Lift the cabin at the front.
f
Place the buggy wheel into the wheel mount as far as
it will go, until it engages audibly with a clicking noise.
f
Check whether there is sufficient air in the buggy
wheel (maximum air pressure: 1.9 bar). If necessary,
use an air pump for car valves to top up with air.
Adjusting the buggy wheel
f
Set with the mode selector switch [A] and the release
button (unlock key) [B] in front of the suspension the
desired operating mode:
–
Buggy mode: Buggy wheel rotatable through 360 °.
–
Walker mode: Buggy wheel running straight.
–
Trailer mode: unfasten and pull out the buggy
wheel.
Assembly