QERIDOO Kidgoo1 2018 страница 6 Скачать руководство пользователя

Страница: 6 / 38

– 09|2020 – Subject to change.

Kidgoo 2018

Safety instructions

Danger!

Read the safely instructions below carefully.
The safety and accident prevention regulations valid in your region and statutory rules

such as the road traffic regulations also apply, and take precedence in cases where

there is doubt.
Make sure that the

Kidgoo

is used only by persons suitable for its operation, as defined

below. Users must have read and understood this user manual in full.

Caution!

The

Kidgoo

is not a toy and must not be misused as such. This means that it is not

permissible to attach the

Kidgoo

to a child’s bicycle.

Users

Users are defined as the following persons:

–

Any person carrying out assembly work on the vehicle or changing the settings.

–

The rider of the towing vehicle in Trailer mode.

–

The operator in Buggy or Walker mode.

The user must be at least 16 years old and mentally mature enough to operate the

Kidgoo

and

transport children.

In Buggy mode, operation by a younger person is allowed if he/she is supervised by a person

who meets the requirements stated above.

The user is at all times responsible for the proper use and roadworthiness of the

Kidgoo

Conditions of use

The

Kidgoo

must not be used for commercial or competitive purposes.

Check the screw connections for tight fit before the first use. In particular, the tow bar holder,

the spokes and the thru axles of the wheels must be checked before use.

Before every journey, check that the

Kidgoo

is in a proper and technically faultless condition.

Perform a visual inspection and in particular pay attention to the instructions and checklists in

the chapter

„Maintenance intervals“ on page 32

. The notes in the chapter

"Before every ride"

and

"Monthly (or every 200 km)"

also apply to the first use of the

Kidgoo

Also inform yourself about country-specific rules and traffic regulations if you are making trips

across borders or if you want to take the

Kidgoo

with you on trips abroad.

Before every journey, make sure that the requirements for the particular mode have been

fulfilled. In particular, pay attention to the table and the instructions in the chapter

„Setting the

mode“ on page 22

In Trailer mode, a rear light must be indicated and operated on the left side of the push handle

in accordance with the Road Traffic Licensing Regulations in darkness or conditions of poor

visibility.

Before every journey, close the inner part of the 3-in-1 canopy so that the integrated insect

net protects the children from insects and small stones. When in traffic, the weather canopy

should also be closed and the ventilation window open to provide protection against exhaust

fumes.

Содержание Kidgoo1 2018







































Результаты поиска

Содержание Kidgoo1 2018

Отзывы:

Похожие инструкции для Kidgoo1 2018

Бренды по названию

Популярные бренды

QERIDOO Kidgoo1 2018, Руководство пользователя

Результаты поиска

Содержание Kidgoo1 2018

Отзывы:

Похожие инструкции для Kidgoo1 2018

Бренды по названию

Популярные бренды