![QERIDOO Kidgoo1 2018 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/qeridoo/kidgoo1-2018/kidgoo1-2018_user-manual_765402013.webp)
Kidgoo 2018
Subject to change. – 09|2020 –
13
Assembly
Below you can read all the information that you will need to assemble your
Kidgoo
properly.
f
Make sure that you have sufficient space to assemble it.
Also pay attention to the door width at the place of installation: The
Kidgoo1
is 72 cm wide with
the wheel guards fitted and the
Kidgoo2
is 82 cm wide.
f
Have a size 4 mm hex key to hand.
f
Perform each of the instructions step by step.
f
If necessary, follow the QR code to call up a video about
assembly and operation on the Internet.
VIDEOTU
TO
RIA
L
Danger!
Never perform assembly work if there are children in the cabin. Keep children away from
the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get
trapped.
Unfolding the cabin
f
Place the collapsed cabin in the assembly area.
f
Position yourself behind the cabin.
f
Pull both sides of the rear cabin frame all the way up.
f
Open the cover of the storage compartment.
f
Pull the lower horizontal bar backwards evenly until
the two rey locks on the left and right engage audibly.
Attaching impeller axle
The
Kidgoo
is equipped with a fully automatic air-leaf spring combination. With the leaf springs you
screw the impeller axle to the retainer of the cabin frame
f
Tilt the cabin backwards and place it on its roof surface. This makes the lower cabin frame
accessible for installation.
f
Loosen the 4 hexagon socket screws from the leaf spring retainer.
f
Align the leaf springs so that the holes overlap.
Содержание Kidgoo1 2018
Страница 37: ...Kidgoo 2018 Subject to change 09 2020 37 ...