QERIDOO Kidgoo1 2018, Руководство пользователя

Страница: 16 / 38

16 – 09|2020 – Subject to change. Kidgoo 2018
Inserting the wheels
f
Lift the cabin a little bit in order to install the wheel
easier.
f
Insert one wheel into the cabin’s axle retainer:
–
Hold the wheel so that you can press your thumb
onto the rubber cap on the outside of the wheel
hub.
–
Press on the rubber cap and keep it pressed in order to open the push-in axle fastening.
–
Insert the wheel’s push-in axle as far as it will go into the axle retainer.
–
Release the rubber cap to secure the push-in axle.
f
Pull on the wheel to check that the wheel is locked in the axle retainer.
f
Insert the second wheel in the same way.
Danger!
After mounting the wheels, secure the Kidgoo whenever you park it so as to prevent it
from rolling away, see „Applying the parking brake“ on page 21 .
f
Check whether there is sufficient air in the wheels (recommended air pressure: 2.5 – 3.5 bar).
If necessary, use an air pump for car valves to top up with air.
Tightening the backrest
The stable backrest is an important safety element. The belts must always be tight under the seat
and behind a cabin for a good grip.
f
Put the cabin in the upright position and open the
cover.
f
Check the tension of the 4 belts under the seat and
tighten them firmly.
f
Open the cover of the storage space and check the
tension of the 5 harnesses behind the backrest.
f
Tighten all straps in the rear storage compartment.
Assembly