7
QEES A/S - Naverland 2,14 sal. - 2600 Glostrup - Denmark - (+45) 81 41 10 10 - www.qees.eu
Another way to associate a device to a group is by using ASSOCIATION_SET
command, from the Association Command Class, sent over Z-Wave from another
device.
Exclusion of a device from the network
With the help of
QEES
MyKey you can also remove a device from your Z-Wave
network by following the steps:
1.
Go to the MyKey Green Menu and select the yellow action – exclude node
from network action;
2.
Select the yellow action from the Blue Menu on the
QEES
slave
device that
you want to remove;
3.
The
QEES
device and MyKey will both glow green for 2 seconds;
4.
The device has now been removed from the network and can be added to
another Z-Wave network;
5.
For non-
QEES
products please refer to their manuals for how to start “Z-Wave
learn mode”.
Creating one-way link between products
QEES
MyKey also provides you with another option to link two different
Z-Wave
products between them directly.
In order to do that you have to follow the next steps:
1.
Go to the green menu on your MyKey and select the purple option;
2.
Press 3 times quickly on the
QEES
device to be linked as a slave unit (the
MyKey LED lights green) – the device will send a Node Information Frame;
3.
Then press 3 times quickly on the
QEES
device to be linked as the controlling
device (the MyKey LED flashes green) – the device will send a Node
Information Frame;
4.
Your one-way link has been created. Now press the configured
QEES
control
device and make sure that the other
QEES
device is turned on;
5.
For non-
QEES
products please refer to their manual in order find out how to
send a Node Information Frame.
Deleting an association between MyKey and a device
You can always delete the association between MyKey and the device from a specific
group on your MyKey by repeating steps 1 to 3 under “
Associating existing products
to your MyKey
”. Basically the same steps have to be done in order to delete the
association.
Controlling Devices
After association of a device to a group and implicitly to a button you can start
controlling the device with the help of MyKey.
The controlling action can be described as follows:
-
a
single click
on a button toggles all the devices in the group corresponding to
that button by sending a BASIC_SET command ;
