4
QEES A/S - Naverland 2,14 sal. - 2600 Glostrup - Denmark - (+45) 81 41 10 10 - www.qees.eu
4.
Controller shift – blue flash followed by green color
5.
Menu Exit –blue flash and red color
4. LED Color Guide
The menu system we use for MyKey involves LED color action response. In order to
make it easy here is a correlation between the action and the LED color displayed:
Green
– represents success (displayed after an action has ended with the proper result)
Red
– represents error (displayed after an action has ended without the proper result)
Purple
– represents “sending data” (displayed while the device is sending data to
another device in the Z-Wave network)
Cyan
– represents “receiving data” (displayed when the device receives data)
Blue
– represents waiting process (displayed when the device is waiting for data)
Orange
– represent “timeout” (displayed when the device doesn’t get the input in a
certain amount of time for an action)
Blue Menu (Network Options)
In this menu you can perform actions related to the network state of the MyKey. When
you want to include/exclude the MyKey to/from your network you go to this menu and
select the action that you need.
To activate the
Blue Menu
go to Menu Selection Point and click your way to the blue
option. Once you have reached the blue option press button 2 to access the
Blue Menu.
At this point you have reached the Action Selection Point and the LED feedback you
get is blue along with another color (the action color – usually cyan for the first action
from a specific menu).
The actions (that you can cycle through by using buttons 3 and 4 for up and down) and
LED feedback associations in the
Blue Menu
are:
1.
Cyan
– Get controller type;
2.
Yellow
– Start Z-Wave learn mode;
3.
Purple
– Restore default settings;
4.
Green
– Controller shift;
5.
Red
– go back to Menu Selection Point
.
Green Menu (Controller Options)
In this menu you can build a network around your QEES MyKey by adding/removing
products to/from its network.
To reach the
Green Menu
you have to reach the Menu Selection Point and click your
way to the orange option. Once you reach this option you access it by pressing MyKey
button 2.
The actions (that you can cycle through by using buttons 3 and 4 for up and down) and
LED feedback associations in the
Orange Menu
are:
1.
Cyan –
Include node to network;
2.
Yellow –
Exclude node from network;