QED AutoPump AP-3 Скачать руководство пользователя страница 15

Страница: 15 / 119

QED Environmental Systems

AP-3 Manual

Page 6

•

Point all hoses away from personnel and equipment when connecting or disconnecting.

• Always ensure that the fluid discharge hose is connected before the air hose to prevent

accidental discharge.

The AutoPump System minimizes the potential for accidents with the following safeguards:

Fire and Explosion Protection

Almost all of QED underground fluid extraction systems are pneumatic. This offers many

inherent fire and explosion protection features:

• Compressed air lines eliminates electrical wiring in hazardous areas.

• Aluminum or fiberglass enclosures prevent sparking.

• Standard systems use brass fittings to help eliminate sparking hazard.

Personal Protection

On-site, service and maintenance personnel can safely use

QED

equipment. Safety-

in-use is the primary design feature in all systems. Following are some samples:

• All standard high pressure air hoses have automatic shut off quick-connects on the

supply side which prevents injury due to hose whip or air blown particles.

• Metal regulators and filter bowls are rated at 150 psi. The metal air filter bowl

is made of aluminum, providing greater pressure and chemical resistance than

plastic bowls and it is less prone to damage if dropped.

Spill Protection

On-site spills cannot always be prevented.

QED

equipment is designed to take into

consideration such unpredictable occurrences that may happen despite strict adherence to

standardized safety practices.

•

The

standard air and fluid hoses are rated at over 800 psi burst pressure to prevent

accidental hose breakage.

•

Down well quick-connects have locking features to prevent accidental disconnections.

Содержание AutoPump AP-3
























































































































Результаты поиска

Содержание AutoPump AP-3

Отзывы:

Похожие инструкции для AutoPump AP-3

Бренды по названию

Популярные бренды

QED AutoPump AP-3, Руководство по эксплуатации

Результаты поиска

Содержание AutoPump AP-3

Отзывы:

Похожие инструкции для AutoPump AP-3

Бренды по названию

Популярные бренды