Manual for Advance 12 series
Introduction
Onboard IDE
l
Supports two PCI PIO and Bus Master IDE ports
l
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and
CDROM drives
l
Supports up to mode 4 timing
l
Supports “Ultra DMA/33”Synchronous DMA mode transferring up to 33 MB/sec
l
Supports “Ultra DMA/66”Synchronous DMA mode transferring up to 66 MB/sec
l
Supports “Ultra DMA/100”Synchronous DMA mode transferring up to 100 MB/sec
l
Integrated 16x32bit buffer for IDE PCI Burst Transfers
Onchip I/O
l
One floppy port supporting up to two 3.5” or 5.25” floppy drives with 360K/720K/
1.2M/1.44M/2.88M format
l
Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4
selective) with 16-byte send/receive FIFOs
l
One enabled parallel port at the I/O address 378H/278H/3BCH with additional
bi-direction I/O capability and multimode as SPP/EPP/ECP (IEEE 1284 compliant)
l
Provides Six USB ports and One IrDA connector
l
Provides One SCR interface connector and One ACR slot
l
Supports PS/2 mouse and PS/2 keyboard
l
Supports LS-120 floppy disk drive and Zip drive
l
All I/O ports can be enabled/disabled in the BIOS setup
AGP Pro slot
l
Provides one AGP Pro slot
l
AGP v2.0 compliant
l
Supports AGP 4x mode
Onboard Audio( Available on Advance 12-A/-AL )
l
Built in VIA
VT8233
l
Standard AC97 Codec interface
Creative
®
CT5880 PCI Hardware Sound ( Available on Advance 12-C/-CL)
l
PCI 2.2 compliant
l
3D audio effects
l
32-voice XG wavetable synthesizer
l
Direct Sound/Music Hardware Accelerator
l
Full-Duplex stereo
l
Supports four speakers output based on Speaker-out jack and Line-in jack
Onboard LAN( Available on Advance 12-L/-AL/-CL )
l
Provides One 10/100M LAN interface
l
10/100 Mbit/sec Ethernet support