Manual for Advance 12 series
Installation Instruction
If CPU FSB is set as 66MHz, the system only runs at 66MHz front side bus even if a processor
with 100MHz or higher. If CPU FSB is set as 100MHz, the system can run at 100MHz front side
bus even if a processor with 66MHz FSB installed. Setting up to 133MHz FSB is also sup-
ported. However, whether or not your system can be overclocked depends on your processor’s
capability. We do not guarantee the overclocking system to be stable.
Enable Keyboard Password Power-on function (JKB)
The motherboard provides the advanced keyboard password power-on function.
Before using this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2
& pin3 closed for disabling.
Enable:
Disable:
JKB
1
2
3
JKB
1
2
3
Furthermore, in order to implement this function, set “Power On By Keyboard” to Pass-
word and enter the keyboard power-on password in the “INTEGRATED PERIPHERALS”
section of the BIOS. Save and exit, then power off your system.
Note:
1. If the characters of your password are more than one, you must press
“Enter” key to power on after entering the password.
2. If using this function, 5VSB line of the power supply should be capable of
delivering enough current (eg. 200mA) for all the devices connected to the
keyboard port, if not, you will be unable to power up the system using the
keyboard.
3. If you set JKB with pin2 & pin3 closed, set “POWER ON by Button” to Enabled
ONLY, or you’ll be unable to power up your system by the keyboard or the
power button.
4. If you encounter the above problems, clear CMOS and set the jumper and
BIOS option again.