Manual for Advance 12 series
Creative CT5880 chip (Available on Advance 12-C/-CL)
The CT5880 provides high-quality audio performance and low CPU utilization for you.
Featuring 128-voice wave-table synthesis with very high sample rate converters. In
addition, CT5880 supports localized three-dimensional sound immersion in headphone
and four-speaker environments. The four-speaker based on speaker-out and line-in jack.
the CT5880 also supports multiple algorithm levels of reverb and chorus effects on the
wave-table sounds as well as spatial sound enhancement on MIDI and wave sounds in
two speakers. Full duplex operation also allows simultaneous audio recording and play-
back.
The motherboard has two solutions for onboard audio.
Please refer to Appendix A to install the Audio driver.
AGP Pro Connector
The AGP Pro specification is a connector definition for high-end servers and workstations. It
is specifically designed for 4x mode operation, although it will support 1x and 2x mode
operation with either 1.5V or 3.3V signalling. AGP Pro will electrically, mechanically, and
thermally support up to 110 Watts through the connector.
Note:Do not remove the “Small Card” in the AGP Pro slot when using normal
AGP Card. We will not be responsible for any damages caused.
Soft Sound( AC97 )
( Available on Advance 12-A/-AL )
Hardware Sound( CT 5880 )
( Available on Advance 12-C/-CL )
Introduction
