Qcells Q.TRON M-G2.X Series, Инструкция по установке и эксплуатации

Страница: 10 / 22

INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.TRON (BLK) M-G2.X 10
Mounting options with bolts
The illustrated installation options apply for both horizontal and vertical module orientation.
Module Bolt Mounting rail
4 BOLTS / SCREWS ON LONG SIDE &
2 CONTINUOUS RAILS PARALLEL TO SHORT SIDE
4 BOLTS / SCREWS ON LONG SIDE &
2 CONTINUOUS RAILS UNDERNEATH LONG FRAME PARTS
FB1
EN
FB1
L
FB2
EN
FB2
L
POSITION OF
BOLTS [mm]
TEST LOAD
PUSH / PULL [Pa]
DESIGN LOAD
PUSH / PULL [Pa]
POSITION OF
BOLTS [mm]
TEST LOAD
PUSH / PULL [Pa]
DESIGN LOAD
PUSH / PULL [Pa]
L 371 5400 / 3600 3600 / 2400 L 371 3700 / 3600 2460 / 2400
FB1, FB2
Ensure that module frame is fixed directly on the rail of the substructure (no spacer allowed between the
module and substructure).
Use M8 corrosion-proof screws and washers (diameter ≥ 15.8 mm) for mounting slots (Detail A, Fig.1).
Mounting screws and washers should have the same material properties.
FB2 Minimum support depth of 15 mm is required on the back side of the module.
Mounting options with insertion profiles
The illustrated installation options apply for both horizontal and vertical module orientation.
Module Profile
INSERTION PROFILE ON LONG SIDE INSERTION PROFILE ON SHORT SIDE
IP1
IP1 IP2
IP1 IP2
IP2
IP1 IP2
IP1 IP2
TEST LOAD
PUSH / PULL [Pa]
DESIGN LOAD
PUSH / PULL [Pa]
TEST LOAD
PUSH / PULL [Pa]
DESIGN LOAD
PUSH / PULL [Pa]
3600 / 3300 2400 / 2200 2400 / 2000 1600 / 1330
IP1, IP2 Ensure minimum support depth of 15 mm on the backside and 10 mm on the front side of the module.
2 Planning
2.3 Mounting options