INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.TRON(BLK) M-G2.X
15
3 Installation
3.3 Module installation
Option 1:
Fasten the module with 4 clamps in the specified
clamping range, see section "Mounting options with
clamps" of chapter “2.3 Mounting options”.
Tighten clamps according to manufacturer’s
instructions.
Maintain an interval of at least 10 mm between two
modules along the short side and 5 mm along the
long side.
10 mm
5 mm
EU
Note! Module damage may occur!
Do not subject modules to mechanical tension. Max.
torsion 10 mm / m.
Option 2:
Install the module at the 4 mounting points,
see section "Mounting options with bolts" of chapter
“2.3 Mounting options”.
Tighten screws according to manufacturer’s
instructions.
Option 3:
Install the module using mounting profiles,
see section "Mounting options with insertion profiles"
of chapter “2.3 Mounting options”.
