Quick Install Guide
4-Port Vizionlink™ Frame Grabber Card (PCIE-VL-3440)
1. Identifying the Parts
FAKRA connectors
Follow the sequence to connect the cameras.
Grabber card gold finger
1
2
3
4
Firmware update switch
Note:
To update the firmware, toggle the switch to the programming mode (right side) and strongly suggest operating this procedure by a technician.
INNOVATORS OF TECHNOLOGY
2. How to Assemble the Card and the Cameras
1.
Push down the grabber card into the PCIe slot directly.
2.
Make sure the golden finger of the card is inserted firmly, and secure the card with a screw.
3.
Connect the coaxial cable into the FAKRA connector of the frame grabber card on the I/O rear panel of the computer and the other end to a
camera. Follow the sequence mentioned in the
section to connect other cameras.
1
2
3
