Quantum 1107
www.quantumrehab.com
21
Power Base Disassembly
The Quantum 1107 power base disassembles into six parts for easy transportation and storage. See figure 13.
To disassemble the Quantum 1107:
1. Turn off power to the controller.
2. Disconnect the controller. See figure 6.
3. Remove the seat.
4. Press the foot platform release button and lift off the foot platform. See figure 14.
5. Flip down the battery box latches on each side of the power base. See figure 15.
6. Slide the battery boxes back and off of the power base.
7. Flip up the centre section latch. See figure 15.
8. Rotate the centre section forward.
9. Grab a side section by the side frame handle.
10. Lift the side section up and off of the centre section.
11. Grab the other side section by the side frame handle.
12. Lift the side section up and off of the centre section.
NOTE: Perform the disassembly steps in reverse order to assemble the power chair.
NOTE: During assembly, make sure the battery box latches are in the up (locked) position and the centre
section latch is in the down (locked) position.
I V . A S S E M B L Y / D I S A S S E M B L Y
Figure 14. Quantum 1107 Power Base Parts
FOOT PLATFORM RELEASE BUTTON
RIGHT FRAME SECTION
LEFT FRAME SECTION
REAR BATTERY BOX
FRONT BATTERY BOX
FOOT PLATFORM
CENTRE SECTION
