Qantum 1107 Скачать руководство пользователя страница 30

Страница: 30 / 51

www.quantumrehab.com

Quantum 1107

V I . B A T T E R I E S A N D C H A R G I N G

BATTERIES AND CHARGING

Your power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free.

Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed to handle a

longer and deeper discharge. Though they are similar in appearance to automotive batteries, they are not interchangeable.

Automotive batteries are not designed to handle a long, deep discharge, and also are unsafe for use in power chairs.

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds.

Wash hands after handling.

Charging the Batteries

The battery charger is essential in providing long life for your power chair batteries. It is designed to optimise your power

chairs performance by charging the batteries safely, quickly, and easily.

WARNING! You must recharge your power chairs batteries with the supplied charger. Do not use

an automotive-type battery charger.

PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary, properly

install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug access. Failure

to heed could result in personal injury and/or property damage.

PROHIBITED! Never use an extension lead to plug in your battery charger. Plug the charger directly

into a properly wired standard wall outlet.

To charge the batteries using the off-board charger:

1. Position your power chair next to a standard wall outlet.

2. Be certain the controller power is turned off and the power chair is in drive mode.

3. Plug the off-board charger into the off-board charger/programming socket on the controller. See VII. Operation.

4. Plug the off-board charger into the wall outlet.

NOTE: If it is a Pride off-board charger, then there are two lights in it. The red light indicates that power to

the off-board charger is on. The green light indicates that the batteries are fully charged. If it is not a Pride off-

board charger, then follow the instructions supplied by the manufacturer.

5. When the batteries are fully charged, unplug the off-board charger from the wall outlet and then from the controller.

Figure 29. Battery Boxes (Removed from Power Base)

OFF-BOARD CHARGER PORT

NOTE: You can remove both battery boxes from the

power base and charge them using the off-board

charger port located on the front battery box. The

battery boxes must be connected in order to charge

them. See figure 29.

WARNING! When charging through the

battery boxes, never use greater than a

5-amp charging system. Failure to

comply may result in damage to your

power chair.

Содержание 1107




















































Результаты поиска

Содержание 1107

Отзывы:

Похожие инструкции для 1107

Бренды по названию

Популярные бренды

Qantum 1107, Руководство пользователя

Результаты поиска

Содержание 1107

Отзывы:

Похожие инструкции для 1107

Бренды по названию

Популярные бренды