Quantum 1107
www.quantumrehab.com
27
V . C O M F O R T A D J U S T M E N T S
LEG REST
ADJUSTMENT
SCREWS
Figure 25. Elevating Leg Rests
LEG REST
EXTENSION
RELEASE LEVER B
RELEASE LEVER A
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 30.5-48 cm.
To rotate the ELRs:
1. Push in release lever A. See figure 25.
2. Rotate the ELRs.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension. See figure 25.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
To adjust the ELR angle:
1. Push down release lever B. See figure 25.
2. Move the leg rest to the desired angle.
Anti-Tip Wheels
The anti-tip wheels are designed to give your power chair
increased stability on rough surfaces. The anti-tip wheels
are preset at the factory for smooth surfaces or indoor use
only. If you plan on using your power chair on rough sur-
faces, it may be necessary to adjust the anti-tip wheels to
better suit your needs. The anti-tip wheels may need ad-
justment if the following occurs:
n
When coming to a stop, your power chair tips forward
excessively.
n
The anti-tip wheels constantly rub the ground.
WARNING! Consult your Quantum Rehab
Specialist before attempting to change
the anti-tip wheel height! Changing the
anti-tip wheel height affects handling
under acceleration!
Figure 26. Anti-Tip Wheel Assembly
NUT A
BOLT B
WARNING! The higher you raise the anti-tip wheels, the more you increase your power chairs
tendency to tilt forward while decelerating. You can compensate for this by having your Quantum
Rehab Specialist make a small adjustment to the pre-programmed deceleration setting in the
controller or by moving the seat assembly farther to the back of your power chair.
PROHIBITED! Do not remove the anti-tip wheels.
NOTE: Each drive tyre must be inflated to 2.4 bar (35 psi) if equipped with pneumatic tyres. The user must
also be seated in the power chair in order to properly adjust the anti-tip wheels.
