3.2 Front view
21
3.2.2
Front plates
All versions are suitable for installation in an instrument panel or switching cabinet. The material
used for the front plate differs depending on the system:
GN07: zinc-coated steel plate painted RAL9011 (black)
Others: aluminum front plate with polyester front foil
Dimensions (mm)
GN07
GN10
GN12
GN15
Front plate (W x H)
235 x 168
348 x 277
380 x 312
449.4 x 354
Display (W x H)
157 x 95.8
214.2 x 161.2
248 x 186.5
306 x 230
Rear side enclosure (W x H x D)
215 x 146.2 x 45.7
295 x 234 x 44
324 x 263 x 49.5
406.4 x 311 x 50
3.2.3
Display with touch screen
GN series touch panels include a TFT display (see p. 52) with corresponding resistive touch
screen (glass-glass technology). A stylus is supplied for touch screen operation.
The surface of the display is also mechanically protected by the touch screen. The touch screen
(USB connected) registers contacts of a finger or a pen and allows you to move the mouse
pointer. This works only if the necessary software is installed. You receive the touch screen
driver for your operating system installed on your system.
Do not use a hard or a pointed object (like screw drivers) to operate the
touch screen because this can damage the touch screen surface.
The front panel (GN10/GN12/GN15) and the touch screen are covered
by a plastic overlay. Be careful when cleaning the plastic overlay (see p.
21).
3.2.4
Touch screen care and cleaning
For cleaning we recommend a mild detergent and water. Do not use of strong solvents, which
could attack paint or plastic. Protect the plastic overlay and the touch screen surface from direct
heat sources such as cigarettes. The display front is sealed against dust, liquids, etc.
The front surface of the touch screen is a flexible plastic foil. Avoid touching it with sharp
objects such as a knife, a pen or a pencil tip. Sharp objects can permanently damage the
functionality of the touch screen. Units without a touch screen have a polycarbonate shield,
which may be scratched if an object is sufficiently sharp.
Содержание Imagechecker Q.400PD
