Q.VITEC Imagechecker Q.400PD, Руководство по оборудованию

Страница: 12 / 65

1.2 Overview
11
1.2 Overview
The GN series touch panels are human-machine interfaces (HMIs) designed for demanding
industrial applications such as installation in an instrument panel or switching cabinet.
All versions are suitable for installation in an instrument panel or switching
cabinet. Use the mounting clamps included with the product.
The GN series includes:
 GN07, 7" display

GN10, 10.4" display
 GN12, 12.1" display
 GN15, 15" display
In front of the display there is a touch screen that also protects the display surface from dirt and
scratches. The system is suitable for operation in harsh industrial environments.
The GN is equipped with interfaces such as 1x serial COM1 (RS232), 2x LAN (10/100/1000
Mbps), 2x USB (2.0), 1x VGA. Additional interfaces can be installed as follows:
 The GN10/GN12/GN15 can be expanded with up to two additional interfaces, one in-
dustrial fieldbus interface and one additional serial COM2 (RS232 or RS485/422).
 The GN07 can be expanded with one additional interface. This can be either an indus-
trial fieldbus interface
or an additional serial COM2 (RS232 or RS485/422).
The GN is designed to be connected to a +24V DC power supply using the DC power plug
(included).
The GN series touch panels are designed to fulfill the IP65 degree of pro-
tection for the front side. However, the USB connector on the front (if pre-
sent) must be covered by the elastic captive rubber coat.
The GN is a fanless system. The cooling of the unit is performed by ventilation holes in the
housing. The ventilation holes are located at the sides of the device and provide air circulation
in order to prevent the system from overheating.
 When powering on the GN, make sure that the ventilation holes are not
obstructed.
 Make sure that the GN is mounted as specified (see p. 54). The GN series'
devices are designed to be used in vertical position with the interfaces
downwards. It must not tilt more than 10° in the application.