WEB OPERATION
QC40198/QC40196 User Manual
74 |
P a g e
7777 W
W
W
WEB OPERATION
EB OPERATION
EB OPERATION
EB OPERATION
7.1
7.1
7.1
7.1 Network
Network
Network
Network C
CC
Connection
onnection
onnection
onnection
BEFORE YOU CAN ACCESS THE DVR REMOTELY YOU NEED TO SETUP THE NETWORK CONFIGURATION ON
THE DVR TO WORK WITH YOUR ROUTER.
PLEASE REFER TO CHAPTER 5 - 5.5.3 Network
Before web operation, please check the following items:
Network connection is right
Combo DVR and PC network setup is right. Please refer to network setup (main menu->setting->network)
Use order ping ***.***.***.***(* combo DVR IP address) to check connection is OK or not. Usually the return TTL
value should be less than 255.
Open the IE and then input combo DVR IP address.
System can automatically download latest web control and the new version can overwrite the previous one.
If you want to un-install the web control, please run
uninstall webrec2.0.bat
. Or you can go to C:\Program
Files\webrec to remove single folder. Please note, before you un-install, please close all web pages, otherwise
the un-installation might result in error.
7.1.1 PORT FORWARDING
To access the DVR from a remote computer you need to forward ports 80 and 37777 from the router the DVR is
attached to, to the IP address of the DVR.
Connect your DVR to the Router and power on DVR
Configure your DVR and Set up port forwarding on your router
a.
Go to
www.portforward.com/qsee
Figure 7-1
b.
Choose your DVR or Series (QC) from the list provided
Figure 7-2
